All In One System (ALIS)


View full specifications (PDF)

Features

Open View of the All In One System
  • Authenticated camera images with or without encryption
  • Simple parameter setup and operation through built-in monitor with “Jog Dial” (one button operation)
  • Image recording on PC-Card (PCMCIA) hard disk or flash card
  • Fixed interval recordings (5 seconds to 18 hours) and/or through front-end scene change detection including “motion history” (pre- and post-event images)
  • Stand-alone and unattended operation
  • Comprehensive power management for battery backup for up to ten days with built-in Lithium-Ion battery
  • VACOSS-S seal can be connected for location identification or other purposes and can generate triggers (pre- and post-event images)

 

Description

The All In One System (ALIS) is an intelligent camera system for safeguards surveillance applications.

The ALIS camera system is an extensive application of the DCM 14 module and consists of the Digital Camera Module DCM-14 equipped with a PC-Card, a DCMVT 100 monitor module, and a power supply for worldwide use. All three modules fit into the standard IAEA camera housing.

The ALIS camera system enables the user to perform a quick set-up of the system as required for a specific surveillance application without additional equipment (no need for a PC). The set-up menus appear on the DCMVT 100 screen, and the different selections can be made using the built-in pointing device on the right hand side of the module. The view of the CCD camera can also be controlled by the DCMVT 100 monitor when switched to “live video”.

NORMAL OPERATION

Normally the ALIS camera system is powered by mains. The DCM-14 module is equipped with a PC-Card to store images and related data. The required capacity of the PC-Card per inspection interval depends on the picture-taking interval set by the user (five seconds to a maximum of 18 hours). The image data compression algorithm implemented into the DCM-14 permits the storage of approximately 60 images per megabyte of PC-Card storage. The system offers a variety of operational modes, e.g. different parameters can be set for day and night surveillance or for working days and weekends. Another highlight is the delayed start feature. This feature allows the user to preset a date in the future to start the system without a second visit to the facility. In the event of a mains loss, the Lithium-Ion battery guarantees a reliable operation without loss of surveillance.

CCD – CAMERA FEATURES

The CCD camera used in the ALIS is a highly compact, low power camera manufactured by Sony with high sensitivity and an auto iris lens (Sony® OEM product). A range of auto iris lenses and two different video standards (CCIR and EIA) make this camera very flexible. Because of its compactness and how easily the camera can be installed, the complete camera can be changed to adapt to a specific angle of view rather than changing the lens.


View full specifications (PDF)

Top of Page



Contact Us
Email Us or via phone

In the United States
(800) 243-3955

Outside United States:
(203) 238-2351

Online Quoting
Reference Material