Cabinets and Accessories
CANBERRA offers a line of general purpose instrumentation cabinets and workstation desks for use with our laboratory systems.
Products in category
Cables and Connectors
CA130
BNC Tee Connector
(One Male, Two Female)
CA131-50 ohms
CA132-93 ohms
BNC Terminator
CA134
SHV Female Bulkhead Solder Jack
3/8-32 thread
CA135
SHV Female Bulkhead Crimp Jack
3/8-32 thread
CA136
SHV Tee Connector
(One male, two female)
CA138
BNC Male Plug
CA140
SHV Male Plug
CA141
BNC Barrel (two female)
C120-X
BNC to BNC; RG62/U
93 ohm cable
C123-X
SHV to SHV; RG59/U
75 ohm Cable
C125-X
BNC to BNC; RG58C/U
50 ohm cable
C126-X
BNC-SHV Cable; RG59/U (0.3 m)
C128
LEMO-BNC; RG174/U
50 ohm cable
C129
LEMO-LEMO; RG174/U
50 ohm cable
C1402-X
Preamp Power Cable
C1403
Module Power Extender (0.9 m)
C1514
PUR/LTC Wiring Cable (1.5 m)
C1519
PC Serial Adapter Cable
C1546
Peripheral/PC Serial Port Cable, 25-pin
LB1500
Cable Transformer
LB1501
GLE Preamp Power Cable
LB1502
Schottky Clamp Box
LB1503
Bias Isolation Box
C1703-2
AIM/AMX to 8700 Series ADC
C1560
12-Port ICB Connecting Cable
751622
AMX Expansion Cable
C1552
AccuSpec NaI Plus
Preamp Power Adapter
Detector System Loop-Buster Accessories
High resolution spectroscopy systems require several connections involving the preamp, bias supply and spectroscopy amplifier.
Under normal operating conditions this does not present a problem, and optimal performance is achieved.
However, in some applications these interconnections are extraordinary in terms of length, routing or environment. Under such conditions systems are susceptible to oscillations or noise due to ground loops and to EMI (electromagnetic interference) from sources such as raster displays, power supplies, computers, etc. This noise interference will degrade the performance of most high resolution detector systems.
CANBERRA has several accessories which minimize these problems without affecting cable lengths, routing or system configuration.
An application note entitled "System Considerations with High Resolution Detectors" will be provided when any of the Detector System Loop-Buster Accessories are ordered. The application note is also an integral part of the Germanium Detectors User Manual.
The following units are available individually from our Loop-Buster tool kit.
LB1500
Cable Transformer - 93 Ω BNC cable with ferrite core to reduce high frequency interference. Use between preamplifier and amplifier.
LB1502
Schottky Clamp Box - Prevents oscilloscope overload when using high sensitivity settings for precise P/Z adjustments.
LB1501-X
Ground Loop Eliminator (GLE) Preamp Power Cable - Preamp power cable with diode interrupted ground to eliminate ground loop. X=length (10 ft or 15 ft are standard).
LB1503
Bias Isolation Box - Provides resistive isolation of ground circuit between high voltage power supply and preamp to reduce ground loop induced noise.
LB1504
The LB1504 Ground Isolation Box is used to mitigate performance degradation that might result from ground loops associated with AC mains connections that result in EMI noise pickup.
The Ground Isolation Box includes a choke connected between the input and output earth (safety) grounds. Due to the nature of inductance, the input /output ground remains low impedance for DC and low frequencies, so the integrity of the safety ground is maintained. At the higher frequencies associated with noise, the impedance increases making potential ground loops less susceptible to noise coupling and pickup.
Systems Cabinets
The cabinets in the first table are primarily used for standard 48 cm (19 in.) rack mount instrumentation. To accommodate most peripherals and computer systems, cabinet depths are a standard 76 cm (30 in.). Cabinet heights range in size to accommodate single NIM bin bench top systems to standing floor units for large computer based Multichannel Analyzer Systems.
General Purpose Instrumentation Cabinets
These cabinets are finished with a light grey textured epoxy paint. All floor model cabinets require a cooling and air filtering system of the proper voltage for the location in which they will be used. For Model 5000, 5001, and 5003 Floor Cabinets, choose either a Model 5011 blower fan for 110 V installations or Model 5012 blower fan for 220 V installations. The fans provide 12 m3 (425 cubic foot) per minute cooling.
| External Dimensions in cm (in.) | Internal Dimensions in cm (in.) | |||||
| Model Number | A (Height) | B (Width) | C (Depth) | D (Height) | E (Width) | F (Depth) |
| 50001 Floor Cabinet | 199.42 (78.5) | 55.9 (22.0) | 76.2 (30.0) | 168.9 (66.5) | 48.3 (19.0) | 73.7 (29.0) |
| 50011 Floor Cabinet | 179.12 (70.5) | 55.9 (22.0) | 76.2 (30.0) | 146.7 (57.8) | 48.3 (19.0) | 73.7 (29.0) |
| 50031 Floor Cabinet | 156.22 (61.5) | 55.9 (22.0) | 76.2 (30.0) | 124.5 (49.0) | 48.3 (19.0) | 73.7 (29.0) |
| 50041 Bench Cabinet | 95.33 (37.5) | 55.9 (22.0) | 76.2 (30.0) | 71.1 (28.0) | 48.3 (19.0) | 73.7 (29.0) |
| 50151 NIM Bin Cabinet | 26.4 (10.3) | 52.7 (20.8) | 47.6 (18.8) | 22.9 (9.0) | 48.3 (19.0) | 48.9 (17.3) |
| 1 Not a CANBERRA-manufactured item. 2 Dim. includes distance from the bottom edge of the cabinet to the floor. These units have casters. 3 Dim. includes maximum height that cabinet can be raised with levelers. |
||||||
Workstation Desks
The dimensions of single- and double-pedestal workstation desks for Whole Body Counting and other applications are listed in the following table. All desks are blue and black with a white top.
| External Dimensions in cm (in.) | Internal Dimensions in cm (in.) | |||||
| Model Number | A (Height) | B (Width) | C (Depth) | D (Height) | E (Width) | F (Depth) |
| 22541 Single Pedestal | 80.2 (31.6) | 182.9 (72.0) | 81.3 (32.0) | 53.6 (21.1) | 48.3 (19.0) | 76.2 (30.0) |
| 22641 Double Pedestal | 80.2 (31.6) | 182.9 (72.0) | 81.3 (32.0) | 53.6 (21.1) Two | 48.3 (19.0) Two | 76.2 (30.0) Two |
| 22741 Freestanding Desk | 80.2 (31.6) | 182.9 (72.0) | 81.3 (32.0) | N/A | N/A | N/A |
| 1 Not a CANBERRA-manufactured item. | ||||||
